Hey photography freaks! I used a Pinout camera remote control device and app to do star trails and long exposure photos when I was out in Joshua Tree N.P. last weekend. I really liked it and thought I’d turn you on to it. I have nothing to gain by doing this, and am not sleeping without anyone from the company. 😀 All photos on this post were taken using the Pinout except for, uh, the one showing the PInout, which is from Zesty’s website. Sadly, it’s only available for Nikon at this point.
Pinout’s Pro kit, which is one of three models, supports loss/theft prevention, simple release, long exposure, timed-release, time-lapse, distance lapse, star trail, geo tagging, geo logging.
Above: Pinout on a Nikon D800. On my D610, it actually goes into the side of the camera, not the front, inserting where the remote shutter release goes.
Pinout is a bluetooth remote control device that acts as an amazingly varied multi-functional remote for your camera (and with the top-of-the-line Full Kit, offers multi-camera remote control!), a geo-tagging device, and a loss/theft prevention feature. You can also activate the camera via voice command, or by shaking your phone. Cool.
The loss/theft aspect, as near as I can tell, only works when your camera is on. This would be handy, particularly for night photographers like us weirdos, if you are doing a long exposure photo and you either lose where your camera was or if your camera “grows legs” and wanders off. However, it’s not so great if you are storing it, as your camera battery is not likely to be on.
I love this aspect of Pinout also. Once you begin the exposure, whether it is a long series of photos for star trails or anything else, you can actually close the app on the phone and do something else (or let the phone “sleep”) and it will continue. This is really well designed, and the app is very easy to use and intuitive.
Here’s what I like about it so far:
1.) Super easy to register and set up and directly connect to the camera.
2.) Does not need to be mounted on the hot shoe and connected with a cable and dongle (again, easy set up).
3.) Small and unobtrusive.
4.) Bluetooth connection appeared solid most of the time, and even if it wasn’t, as long as the star trails or long exposure had been set in motion, it didn’t matter. I could fire the connection reliably from at least 50 ft./15 meters away.
5.) The app is really nicely laid out and easy to use, and I have not needed the manual so far to figure it out.
6.) You can use it to focus the camera as well as trigger it.
7.) The star trails portion is very easy to figure out and set and is extremely flexible.
8.) Unlike Triggertrap, you don’t run down your smartphone. In fact, you can turn off the app on your phone completely, and it will still complete the task at hand, whether star trails or something else.
9.) Also does simple release, long exposure, timed release, time-lapse, distance lapse, geo-tagging, bulb ramping LE HDR, LE HDR Time-lapse, and loss prevention (if the device strays beyond a certain distance, it will alert you, but even if the connection were broken, if the exposure had already been set in motion, the PInout faithfully continued).
10.) Blinks to let you know that the device is connected. Connection seems solid so far.
11.) Draws a very small, minimal charge from the camera instead of requiring the device to be charged, which is very convenient because I don’t have to be concerned with whether yet another device has been charged.
12.) You can close the app and lock the phone and Pinout continues (with Triggertrap, the app had to remain open and illuminated; if you closed the app, its control also stopped).
13.) Responsive customer service via email.
Above: Photo taken in Joshua Tree National Park, CA using the Pinout remote camera control device and app. The layout of the app is really simple.
Concerns at this time:
1.) I said it was small. This is generally a bonus, but I am concerned that it might be easy to lose. I already put some orange gaffer’s tape on it so it would be easier to see since I photograph at night.
2.) I am concerned that it will be easy to break off in the camera if I mistakenly bang it around doing night photography. Because of this, I purchased a 3-year extended warranty.
3.) Only works with Nikon at this time.
4.) It does not fit on a Nikon D610 when using an L-Bracket.
5). Occasionally, even when the phone is within 3 ft./1 meter of the Pinout and the camera, a warning would appear saying that I was in danger of breaking the connection. Again, even if the connection were broken, it seemed that if I were doing a star trails or long exposure, Pinout would continue regardless, which is a relief.
6.) Sometimes requires time for the smartphone and Pinout to re-establish contact if you shut down the phone or close the app, which the app thankfully indicates by having the camera icon light up. This will only matter for triggering the device, and will not matter if you have already triggered the camera, as Pinout will faithfully execute this regardless.
7.) Loses contact if something obstructs the signal path between you and Pinout, such as a building or sometimes a very large tree.T his too will only matter for triggering the device, and will not matter if you have already triggered the camera, as Pinout will faithfully execute this regardless.
I absolutely love this device. Excellent and very capable, and invaluable for things like star trails. I also love that I can trigger the camera remotely, which is good for night time selfies or getting in position to “light paint” quick photos of the Milky Way when there are only 15 or 20 seconds in the exposure. And I love that Pinout is powered by the camera and not another device that requires charging. Excellent device.
VISIT ME, VISIT ME!
You can see more of these photos here on my Ken Lee Photography Facebook Page (poke your head in, say hi, and “like” the page if you would, uh, like), on 500px, or my Ken Lee Google+ Page. We discuss long exposure, night sky, star trails, and coastal long exposure photography, as well as lots of other things, so I hope you can join us!
And you can go to the Ken Lee Photography website, which has more photos from Ken Lee. Thank you very much for visiting!